Tally Alerts

Traps may be sent when a tally reaches a tally threshold configured through RSM.

Note:  Tally Threshold Traps are new in the RSM SNMP Agent and were not supported in the NCR Retail SNMP Agent.

The Tally Threshold traps may be filtered.

Selecting AdministrationàAlertingàSNMP AgentàSuppress Tally Alerts displays the Suppress Tally Alerts window.

In this window, you can configure whether Tally Threshold traps should be sent or suppressed. To suppress an alert, select the corresponding alert, and then select OK.